This website is using cookies
We use cookies to give you the best experience. If you continue using our website, we'll assume that you are happy to receive all cookies on this website.
G190-H44 - Angle (with riser cards)
G190-H44 - Angle (without riser cards)
G190-H44 - Front
G190-H44 - Rear
G190-H44 - Top (with riser cards)
G190-H44 - Top (without riser cards)
G190-H44 - Top Angle

Gigabyte G190-H44 Barebone

High Performance Computing Server
Supports up to 4 x double slot GPU/MIC cards
NVIDIA® validated GPU platform
Intel® Xeon® processor E5-2600 V3 / V4 product families
2 x GbE LAN ports (Intel® I350-AM2)
2 x 2.5 inch + 2 x 1.8 inch fixed internal HDD/SSD bays
80 PLUS Platinum 2000W redundant PSU
Total: $2,551.50
Total without tax: $2,551.50
Total discount:
Total Tax:
Intel® Xeon® E5-2600 V3 processors
Intel® Xeon® E5-2600 V4 processors
To support 140W and 145W processors, the following conditions apply:
- Special fan duct required (see "Part Numbers" below)
- 1.8 inch HDD cage must be removed
- Front bottom PCIe slot cannot be used
Please refer to the manual of "SOP for installing fan duct with 145W processor" in support & download page
NOTE: If only 1 CPU is installed, some PCIe or memory functions might be unavailable.
2 x LGA 2011-3
Mounting pitch: narrow ILM (56x94mm)
Max. length of M4 screw threads: 3.7mm
Screws longer than 3.7mm might damage the motherboard
Intel® C612
16 x DIMM slots
DDR4 memory supported only
Quad channel memory architecture
ECC RDIMM / LRDIMM modules supported
Single and dual rank RDIMM modules up to 32GB supported
3DS LRDIMM modules up to 128GB supported
1.2V modules: 2400/2133/1866/1600 MHz
2 x GbE LAN ports (Intel® I350-AM2)
1 x 10/100/1000 management LAN
Integrated in Aspeed® AST2400
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp
4 x SATA III 6Gb/s ports
Intel® SATA RAID 0/1/5/10
2 x 2.5 inch hot-swappable HDD/SSD bays
2 x 1.8 inch fixed HDD/SSD bays
Expansion Slots
2 x Full-length low-profile slots
- 1 x PCI-e x16 slot (Gen3 x8 bus)
- 1 x PCI-e x8 slot (Gen3 x8 bus)
4 x Full-length full-height x16 slots (Gen3 x16 bus), supporting:
- Support Intel® Xeon Phi cards
- Support NVIDIA® cards
- Support AMD® cards
- Please contact us for details about the supported card models
4 x Riser cards:
- 1 x CRSG221
- 1 x CRSG220
- 1 x CRSG211
- 1 x CRSG210
Internal I/O
2 x 50-pin PSU connectors
4 x 8-pin ATX 12V power connectors
1 x 6-pin HDD back plane power connector
2 x 4-pin HDD power connectors
1 x Front panel header
1 x USB 3.0 header
4 x SATA III 6Gb/s ports
1 x HDD back plane board header
1 x SATA SGPIO header
1 x TPM header
1 x IPMB connector
2 x RJ45 LAN port connectors
1 x Serial header
1 x Front LAN port LED (link / active) header
1 x Front VGA header
1 x Intel RAID key header
18 x GPU fan headers
4 x System fan headers
1 x BIOS recovery jumper
1 x Clear CMOS jumper
1 x ME update jumper
1 x S3 power on select jumper
1 x Force to stop FRB timer jumper
1 x BIOS write protect jumper
1 x Clear password jumper
Rear I/O
1 x TPM header
OS Supported
Windows Server 2008 R2 (x64)
Windows Server 2012 (x64)
Windows Server 2012 R2 (x64)
Red Hat Enterprise Linux 6.7 (x86/x64)
Red Hat Enterprise Linux 7.2 (x64)
SUSE Linux Enterprise Server 11.4 (x86/x64)
SUSE Linux Enterprise Server 12 (x64)
Ubuntu 12.04 LTS (x86/x64)
Ubuntu 14.04 LTS (x86/x64)
VMware ESXi 5.1 U2
VMware ESXi 5.5 U2
VMware ESXi 6.0 U1
Board Management
Aspeed® AST2400 management controller
Avocent® MergePoint IPMI 2.0 web interface:
Network settings
Network security settings
Users control
Services settings
IPMI settings
Sessions control
LDAP settings
Power control
Voltages, fans and temperatures monitoring
System event log
Events management (platform events, trap settings, email settings)
Serial Over LAN
vKVM & vMedia (launch, configuration)
Operating Properties
Operating temperature: 10°C to 35°C
Operating humidity: 8-80% (non-condensing)
ŠNon-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)
Dimensions (WxHxD, mm)
440 x 43.5 x 900 mm
Motherboard in Barebone
Front I/O
2 x USB 3.0
3 x RJ45
1 x VGA
1 x Serial
1 x ID button with LED
1 x Power button with LED
1 x Reset button
1 x NMI button
Backplane I/O
2 x SAS / SATA III 6Gb/s ports
Power Supply
2 x 2000W redundant PSU
80 PLUS Platinum

AC input:
- 1000W: 100-120V/ 12.5-10.5A, 50-60Hz
- 1800W: 200-220V/ 10-9.5A, 50-60Hz
- 1980W: 220-230V/ 10-9.8A, 50-60Hz
- 2000W: 230-240V/ 10-9.8A, 50-60Hz

DC output:
- 1000W@100-120V
- 1800W@200-220V
- 1980W@220-230V
- 2000W@200-240V
25.6 kg (full packaging)
System Fans
11 x 40x56mm (23'000rpm)
Part Numbers
Barebone package: 6NG190H44MR-00-200
Spare parts:
- Tool-less rail kit: 25HB2-3A0200-C0R
- Back plane board: 9CBPG020NR-00
- Power supply: 25EP0-220002-C2S
- Front panel board 1: 9CFPG000NR-00
- Front panel board 2: 9CFPG010NR-00
- Riser card 1: 9CRSG220NR-00
- Riser card 2: 9CRSG210NR-00
- Riser card 3: 9CRSG211NR-00
- Riser card 4: 9CRSG221NR-00
- Bracket for NVIDIA GPU: 25HB2-G19031-U1R (in option)
- Bracket for Intel Xeon Phi GPU: 25HB2-G19030-U1R (in option)
- Bracket for Intel VCA cards: 25HB2-G19033-U1R (in option)
- Bracket for AMD GPU (S9050 and S9150): 25HB2-G19032-U1R (in option)
- Special fan duct: 25HA8-G19030-S5R
- NVIDIA M60/K80 power cable: 2 x 25CRI-600321-B0R (600mm) + 2 x 25CRI-250322-B0R (250mm) per unit (in option)
Packaging Content
1 x G190-H44
1 x Quick Start Guide
2 x CPU heatsinks
1 x Rail kit