This website is using cookies
We use cookies to give you the best experience. If you continue using our website, we'll assume that you are happy to receive all cookies on this website.
×
R270-R3C - Angle1
R270-R3C - Front6
R270-R3C - Rear8
R270-R3C - Top2

Gigabyte R270-D70 Barebone

Standard Rackmount Server
Intel® Xeon® processor E5-2600 V3 / V4 product family
16 x RDIMM/LRDIMM ECC DIMM slots
12 x 3.5" hot-swappable HDD/SSD bays
Supports SATA III 6Gb/s connections
2 x GbE LAN ports (Intel® I350-AM2)
2 x 750W 80 PLUS Gold 100~220V AC redundant PSUs
Array
$1,883.25
Total: $1,883.25
Total without tax: $1,883.25
Total discount:
Total Tax:
CPU
Intel® Xeon® E5-2600 V3 processors
Intel® Xeon® E5-2600 V4 processors
NOTE: If only 1 CPU is installed, some PCIe, memory, network or I/O functions might be unavailable.
Socket
2 x LGA 2011-3
Mounting pitch: square ILM (80x80mm)
Max. length of M4 screw threads: 3.7mm
Screws longer than 3.7mm might damage the motherboard
Chipset
Intel® C612
Memory
16 x DIMM slots
DDR4 memory supported only
Quad channel memory architecture
RDIMM modules up to 64GB supported
LRDIMM modules up to 64GB supported
3DS LRDIMM modules up to 128GB supported
1.2V modules: 1600/1866/2133/2400 MHz
LAN
2 x GbE LAN ports (Intel® I350-AM2)
1 x 10/100/1000 management LAN
Video
Integrated in Aspeed® AST2400
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp
SATA
8 x SATA III 6Gb/s ports
2 x SATA III 6Gb/s ports supporting SATA DOM
RAID
Intel® SATA RAID 0/1/10/5
Expansion Slots
Total 6 x Full-length low-profile slots
3 x PCIe x16 (Gen3 x16 bus) connectors
1 x PCIe x8 (Gen2 x4 bus) connector
or (via PCIe switch):
1 x PCIe x16 (Gen3 x16 bus) slot
2 x PCIe x16 (Gen3 x8 bus) slots
3 x PCIe x8 (Gen3 x8 bus) slots
Internal I/O
1 x 24-pin ATX main power connector
2 x 8-pin ATX 12V power connectors
2 x CPU fan headers
5 x System fan headers
10 x SATA III 6Gb/s ports
1 x USB 3.0 vertical type A
1 x USB 3.0 header
1 x USB 2.0 header
1 x Serial header
1 x TPM header
1 x Front panel header
1 x HDD back plane board header
2 x SATA SGPIO headers
1 x Chassis intrusion header
1 x LSI UART header
2 x JTAG headers
1 x PMBus connector
1 x IPMB connector
2 x SATA DOM jumpers
1 x BIOS recovery jumper
1 x BIOS password recovery jumper
1 x ME recovery jumper
1 x ME update jumper
1 x BMC FRB jumper
1 x Clear CMOS jumper
1 x S3 mask jumper
Rear I/O
2 x USB 3.0
1 x Serial
1 x VGA
3 x RJ45
1 x ID button with LED
TPM
1 x TPM header
OS Supported
Windows Server 2008 R2 (x64)
Windows Server 2012 (x64)
Windows Server 2012 R2 (x64)
Red Hat Enterprise Linux 6.7 (x86/x64)
Red Hat Enterprise Linux 7.2 (x64)
SUSE Linux Enterprise Server 11.4 (x86/x64)
SUSE Linux Enterprise Server 12 (x64)
Ubuntu 12.04 LTS (x86/x64)
Ubuntu 14.04 LTS (x86/x64)
VMware ESXi 5.1 U2
VMware ESXi 5.5 U2
VMware ESXi 6.0 U1
Board Management
Aspeed® AST2400 management controller
Avocent® MergePoint IPMI 2.0 web interface:
Network settings
Network security settings
Users control
Services settings
IPMI settings
Sessions control
LDAP settings
Power control
Voltages, fans and temperatures monitoring
System event log
Events management (platform events, trap settings, email settings)
Serial Over LAN
vKVM & vMedia (launch, configuration)
Operating Properties
Operating temperature: 10°C to 35°C
Operating humidity: 8-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)
Dimensions (WxHxD, mm)
2U
430 x 87 x 712.4
Motherboard in Barebone
MD70-HB2
Storage
12 x 3.5 inch hot-swappable HDD/SSD bays
2.5 inch HDD/SSD supported
Default configuration supports:
4 x SATA 6Gb/s drives
8 x SAS 12Gb/s drives
(SAS via third party HBA)
Front I/O
1 x Power button with LED
1 x ID button with LED
2 x LAN LEDs
1 x HDD activity LED
1 x System status LED
1 x Reset button
Backplane I/O
12 x SAS/SATA ports
Default configuration supports:
4 x SATA III 6Gb/s drives
Adapter card required to enable the 8 remaining drive bays
Recommended: RA200-8, RA201-A or CRA3338 SAS cards
Power Supply
2 x 750W redundant PSUs
80 PLUS GOLD
AC input:
100-240V, 50-60Hz, 9.50/5.00A
DC output:
750W
Weight
18 kg
System Fans
4 x 80x80x38mm (14'900rpm)
Part Numbers
Barebone package: 6NR270D70MR-00
Spare parts:
- Rail kit: 25HB2-3A6803-I0R
- CPU heatsink: 25ST1-24320B-A8R/25ST1-24320C-A8R
- Back plane board: 9CBP20C0NR-00
- Power supply: 25EP0-207506-L0S
- Power supply PDB: 25EP0-207508-L0S
- AC/DC power supply: 25EP0-20750A-L0S (in option)
- Screws for 1 x HDD: 25KSD-130041-S0R
Packaging Content
1 x R270-D70
1 x Driver CD
2 x CPU heatsinks
1 x Rail kit